 |
Your control arms and/or parts arrive. Click
the picture for details. They are unpacked, pictures are taken and
sent to you. Any problems are noted and discussed before work
starts. |
 |
This is the first pass through the Glass
Beader. The parts have not yet been disassembled. Imperfections have
come to light and a second set of pictures are sent to the customer. Click
the picture for details and to see a typical set of imperfections
that come to light once the parts have been glass beaded |
 |
The ball joints and bushings have been removed from the control
arms. An repairs requested/needed have been made. The control arms
are now ready for the second trip to the glass beader. |
 |
 |
|
Now there is a division here, Most arms go
the Powder Coat route. I still do paint also which is below. |
 |
Parts have been through the glass beader a
second time. They have been reinspected for missed spots and/or
imperfections. The customer's parts have been installed and taped
off so no damage occurs to the paint after wards. Parts are now
ready for three coats of DuPont 4904S Ultra Productive Primer. This
Primer is part of the DuPont ChromaSystem products. Definitely
not spray can paint!!! |
 |
Parts now have three coats of of DuPont 4904S
Ultra Productive Primer. Another set of pictures are taken detailing
condition and sent to the customer. Take a look and you will see how
piped parts come out. This will help you be and educated person when
it comes time to make a decision based on the condition of your
arms. |
 |
The parts now have
three coats of
DuPont ChromaBase 99K Black Base and two coats of Clear
ChromaClear HC-7600S. |
 |
Control arms are ready for shipping. Still
have the Spindles, Steering Knuckles, and Caliper Brackets to do. |
 |
Now for the Spindles, Steering Knuckles,
Caliper mounting brackets, and dust shields. This will be a
condensed version of the above steps as they are the same. Click the
picture for more details. |
 |
This order is done. Is yours next? I would be
happy to refinish your parts. Powder coat, Paint, Glossy,
Correct semi gloss. Your parts or mine. Send me an e-mail, give me a
call and lets discuss it. |
