Scott,

The ball joints came and they are the wrong ones. I really do not understand this as I sent them pictures of what we wanted and they assured me that is what they had.

 

I have question Year One further on the ball Joints they have pictures of in their catalog for Buicks (which are pictures of the ball joints we want) and they now, under pressure, state they are Delco ball joints and the picture may not be correct. They are still on back order so they can not pull one and verify.

 

Your arms are done except for the upper ball joints. I continue to send e-mails with pictures of the correct ball joints to parts suppliers but no luck yet.

 

I do have a set of NOS Buick upper arms with the correct ball joints. They are early arms and have the wrong pivot shafts for what you want. The rubber on the bushings for the pivot shafts are cracked so they need to be replaced. I could remove those and put the right shafts in for what you want. The finish is original but would not be as nice as the lower arms. I am willing to work on this with you. Think on it and I will contact you and see what you want to do.

 

The second set of lower arms you sent are pitted and not sure what you want to do with them.